4-in-1 Soil test meter

4-in-1 Soil meter (temperature, moisture, sunlight & PH)

For outdoor & indoor plants, gardens & grass lawn. Simply insert the meter into the soil, switch to the setting you want to measure and read the scale.

4 in 1 Function - This is a 4-in-1 multifunctional soil tester. The soil meter provides precise measurements of sunlight, moisture, PH value, temperature to help you take better care of flowers and plants.

Easy to operate, lightweight and portable to carry. Just simply plug the probe into the soil about 4 inches（10cm), wait a few seconds and you will get an accurate and precise reading immediately.

Notice function for low power status. Automatic off function after 5 mins for energy saving.

Fast and Precise - The probe adopts upgraded detection technology to make it more convenient and accurate, the large LCD screen will immediately display a consistent and accurate analysis.

Large Screen ＆ Backlight LCD Display - The Soil Tester uses a large LCD screen and green backlight providing a easy to read display in day or dark.

Wide Applications - Professional and practical tools, easy to carry around for indoor and outdoor use, ideal soil test tool for home, garden, lawn and farm plants.

Features:
Measure sunlight, moisture, temperature and pH.
Large LCD screen with green backlight.
Temperature in degrees Celsius or Fahrenheit.
Low battery alert.
Power saving function, turns off after -5 minutes automatically.
8"(200mm) long probe to reach root-deep into the soil being tested
Uses a 9V battery (included)

Specification:
Product size: approx 33cm length, 6.3cm wide
Probe length: 20cm
Temperature measurement range: -9 ~ + 50℃ (16 ~ 122 ° F).
5 kinds of moisture content: DRY+, DRY, NOR, WET, WET+.
9 sunlight levels: LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+.
PH range: 3.5-9.0.
Power supply: One 9V battery.

Products include:
1 x Soil Meter.
1 x 9V battery
1 x User Manual.

Instructions: 
Light measurement
Press ON Button to open the instrument
The highest point light source light sensor window.
The intensity of the current light will be displayed on the liquid crystal display (for accurate readings please ensure you are not casting a shadow on the device). 

PH Range measurement
Press the button on the back to the PH position.
Insert the probe into the soil, the test should be carried out as soon as possible.
Press ON Button to start measuring.
The PH Value will be displayed on the LCD screen. 
It is recommended to take multiple measurements several times to get the exact value.
If the soil is too dry to get accurate measurements, sprinkle a little water, wait 30 mins and try again. 

Moisture measurement
Press the button on the back to the C position.
As far as possible to insert the soil vertically.
Press ON Key to start measurement
The value of the soil moisture will be displayed on the LCD screen.
It is recommended to take multiple measurements several times to get the exact value.

Temperature measurement
When measuring the moisture (button switched to ‘C’ position), the soil temperature will be displayed on the LCD screen at the same time.
Press [C/F OFF] button to set the humidity as Fahrenheit or Centigrade.